Beskrivning

Perfect copies from the tanks as found on the Factory’s race bikes from 1937 thru 1947. Available as a gas & oil tank combo or as a set of 2 gas tanks for use on bikes equipped with a separate oil tank. Tanks do not feature a speedo mount. These tanks do not feature provisions for the stock push-pull type fuel valves but one 3/8″ NPT threaded insert per gas tank for OEM petcocks thru 1939 or Custom fuel valves.

från Samwel Supplies

GAS TANKS The zinc-chromate primer finish on some of our tanks is provided for the protection of the tanks during shipment and storage. It is not recommended as a primer finish for paint applications without proper surface preparation. As with any fuel tank, particularly one where custom paint is to be applied, all tanks must be pressure tested, then cleaned with tank cleaner and sealed with tank sealer before painting, to protect the final finish and prevent internal rust during winter storage. Fuel capacity is measured with tank in upright position, angle of parked bike will determine actual capacity of the fuel tank.

Gas Cap styles